New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Plantation pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Sliding & Patio Doors Across Sunrise
Sliding and patio door replacement in Sunrise runs $2,800-$6,500 for a standard impact-rated unit, with most full-frame tear-out jobs completed in one day once your door arrives from the fabricator. Because Sunrise sits entirely within Broward County’s High Velocity Hurricane Zone, every replacement must carry a Miami-Dade Notice of Acceptance - not merely a Florida Product Approval - which means permits, inspector sign-off, and documented wind-load compliance are built into every legitimate quote.
Our crews serve Sunrise from our Miami office, and we know the local inspection routes, the Sunrise Lakes HOA boards, and the difference between a quote that passes and one that gets red-tagged. Call (754) 704-3597 to schedule your free measured survey. The written price we leave with you is the price on the final invoice - Haven Clause 1, no exceptions.
Why Sightline Windows & Doors Plantation Is Sunrise’s Preferred Sliding & Patio Doors Company
We’ve installed and replaced sliding and patio doors across Sunrise since 2012, from the single-family CBS homes near Sawgrass Mills to the mid-rise condos of Sunrise Lakes. Our Sliding & Patio Doors in Sunrise work is governed by the Haven Standard: a measured survey you keep, a written price before any tool is lifted, and a documented photo record when the job is done.
Sunrise homeowners check reviews before they call. We encourage it. Read our three-star reviews alongside the fives - you’ll find we respond to every one, and we document what we fixed. Our 365-Day Done Right Promise is stamped on every job, not offered as a courtesy. If it’s not done right, we make it right. Period.
Calls are answered by a live person, 24/7. No voicemail queue. No callback window. When you schedule, your technician is background-checked, uniformed, and identified by license number before arrival - Haven Clause 3, Verified Crews. The person at your door is the person on the record.
Before
AfterOur Sliding & Patio Doors Services in Sunrise
Patio Doors
Standard patio door replacement in Sunrise starts around $2,200 for non-impact vinyl and climbs to $4,800 for thermally broken aluminum with low-E insulated glass. Most Sunrise homes built between 1968 and 1988 carry original aluminum single-pane frames that fail current HVHZ structural requirements, so full-frame tear-out is the norm. We measure the rough opening, note any stucco repair scope, and give you the written price before we order.
Impact Sliding Glass Doors
Impact sliding glass doors are what most Sunrise homeowners need. A typical 6-foot unit runs $3,200-$5,800 installed, with 8-foot and multi-panel configurations reaching $7,500-$9,200. Every unit we specify carries a Miami-Dade NOA for HVHZ compliance - PGT and CGI both manufacture lines we regularly install in Sunrise’s wind zone. The design pressure rating is matched to your opening’s exposure, floor height, and surrounding structure, never guessed from a catalog.
Sliding Glass Door Replacement
Replacement jobs in Sunrise almost always require full-frame tear-out. Insert retrofits are not allowed on original aluminum frames that fail HVHZ structural requirements - a fact cheap quotes often skip until the inspector rejects the job. Our measured survey identifies frame condition, rough opening integrity, and any water intrusion damage behind the stucco. The written scope includes all of it. No change orders. That’s Haven Clause 5: No surprises.
Impact French Patio Doors
Impact French patio doors suit Sunrise homeowners who want the traditional hinged look with full hurricane protection. A standard pair runs $4,500-$7,200, with out-swing configurations preferred for HVHZ compliance. We stock Therma-Tru and ViewLux lines specified by what your opening requires, not by what is in stock. Hinged doors in high-wind zones need precise jamb plumb and hardware anchoring - our documented photo record shows every step.
Screen Door Installation
Screen doors for impact sliding units run $380-$650 as add-ons to a new door, or $520-$890 as standalone retrofits to existing frames. Sunrise’s UV intensity degrades screen mesh faster than inland climates, so we specify fiberglass or pet-resistant options with documented warranty terms.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sunrise
We draw from eight manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - specified by performance tier and price range, not by margin. For Sunrise’s HVHZ requirements, we most often specify PGT and CGI impact-rated sliding systems, with Therma-Tru and ViewLux for French door configurations. We do not stock inventory in a warehouse; we order to your measured opening, which means custom fabrication runs 4-6 weeks and the unit that arrives is the unit your survey specified.
Common Sliding & Patio Doors Problems We See in Sunrise Homes
- Original aluminum frames fail HVHZ structural requirements. Sunrise’s 1960s-1980s CBS homes were built before post-Andrew codes. The frames themselves cannot carry the design load, so insert retrofits are rejected at inspection. Full-frame tear-out is required, and cheap quotes that omit this get red-tagged.
- UV and humidity degrade vinyl extrusions and glazing seals faster than ratings predict. Manufacturers benchmark warranty claims in temperate climates. Sunrise’s combination of extreme UV and year-round humidity causes premature seal failure on sliding glass doors spec’d without low-E insulated glass units. We discuss this during every sales call.
- Jalousie-to-patio-door conversions involve irregular masonry rough openings. In Sunrise Lakes Phase communities, removing 1970s jalousie frames leaves non-standard openings that require custom sizing. Contractors unfamiliar with these buildings routinely misquote labor time.
- HOA approval layers add four to six weeks to condo jobs. Sunrise Lakes and similar mid-rise communities require board approval, architectural review, and sometimes deposit bonds before work begins. We build this into our schedule and help homeowners navigate the packet.
Pricing for Sliding & Patio Doors in Sunrise, FL
A standard impact sliding glass door in Sunrise runs $3,200-$5,800. Impact French patio doors run $4,500-$7,200. Non-impact vinyl patio doors start at $2,200 but are rarely spec’d for Sunrise’s HVHZ zone. Large or custom openings - multi-panel sliders, corner configurations, or doors over 96 inches - reach $7,500-$9,200.
What moves the price: frame material (vinyl vs. thermally broken aluminum), glass package (laminated impact vs. insulated low-E), design pressure rating required for your exposure, floor height (second-story and above require higher ratings), and whether full-frame tear-out reveals water damage or stucco repair scope. Every quote includes the measured survey you keep, the written scope, and the photo record on completion. Call (754) 704-3597 for your free estimate.
What Sliding & Patio Doors Costs in Sunrise
Impact windows and doors in the South Florida market generally run $800-$1,500 per opening for standard sizes, with large or custom configurations reaching $2,500-$5,000. Whole-home packages range $8,000-$25,000+ depending on opening count and product tier. For sliding and patio doors specifically, the price ceiling is higher because the moving hardware, track systems, and design pressure requirements for large glass spans add material and labor cost.
In Sunrise, four factors consistently move the number: the HVHZ NOA compliance level (not all products that carry a Florida Product Approval carry the Miami-Dade NOA required here), the floor height and wind exposure of the specific opening, whether the job is full-frame tear-out or new construction, and whether HOA approval processes add schedule time to condo installations. Our measured survey documents all four. The written quote cannot differ from that document - Haven Clause 1.
Florida Pays You Back
Several programs reduce the net cost of impact-rated sliding and patio doors in Sunrise. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades - the program sets final eligibility and funding availability. Florida exempts impact-resistant windows and doors from sales tax. The federal 25C energy credit provides 30% of product cost, up to $600 per year, on qualifying energy-efficient units - consult your tax preparer for your specific situation. After installation, a wind-mitigation inspection ($75-$150) typically yields windstorm premium credits averaging around 25% on the windstorm portion of your homeowner’s policy; your carrier sets the final number. We provide the documentation. You file the claims.
We Also Serve Cities Near Sunrise
Our crews work across central and western Broward County, including our Sliding & Patio Doors service in Plantation, Lauderhill, Davie, and Lauderdale Lakes. Every job in these cities carries the same Haven Standard guarantees: written price before work, verified crews, evidence on every visit, and no surprises.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Sunrise
A Miami-Dade NOA is required. Sunrise lies entirely within Broward County’s High Velocity Hurricane Zone, one of only two U.S. counties with this designation. A Florida Product Approval alone is sufficient in Palm Beach County just to the north, but not here. Every replacement sliding or patio door must carry the specific HVHZ NOA, and the permit application requires the NOA number for verification. Call (754) 704-3597 and we’ll show you how to read the NOA on any quote you’re comparing.
Insert retrofits are not allowed when the existing frame fails HVHZ structural requirements. Sunrise’s 1960s-1980s homes with original aluminum single-pane frames fall into this category. The frame itself cannot carry the design pressure load required for your wind zone. Cheap quotes often propose inserts to hit a lower price, but these jobs get rejected at inspection. Full-frame tear-out is required, and our measured survey documents exactly what that involves for your opening.
Impact sliding glass doors satisfy the opening protection requirement for wind-mitigation credits on your homeowner’s policy. After installation, a qualified inspector documents the HVHZ-compliant product, and carriers typically apply premium credits averaging around 25% on the windstorm portion. The key is the documentation: the Miami-Dade NOA, the permit record, and the final inspection sign-off. We provide all three as standard evidence on every job - Haven Clause 4.
A compliant quote includes: the measured survey you keep, the specific Miami-Dade NOA number for the proposed product, the permit and inspection scope, the full-frame tear-out labor (not insert retrofit), the design pressure calculation for your specific opening, and the documented photo record on completion. Cheap quotes often omit the permit, specify a Florida Product Approval instead of the required NOA, or propose insert retrofits that fail inspection. The written price we give you includes all compliance steps. No change orders. Call (754) 704-3597 for a free second opinion on any written estimate.
Yes. The Sunrise Lakes Phase communities require board approval, architectural review, and sometimes deposit bonds before work can begin. This layer typically adds four to six weeks to the schedule, separate from the 4-6 week custom fabrication time. We help homeowners navigate the approval packet and build the HOA timeline into our project schedule. In our Sunrise Lakes field work, we’ve seen HOA approval add nearly five weeks to a job that otherwise would have proceeded directly to fabrication.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Sunrise since 2012 under the Haven Standard.
Sliding & Patio Doors in Nearby Areas
Six Reasons Homeowners Choose Sightline Windows & Doors Plantation
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Plantation Services
