New Window Installation Cost - Free Measure, Exact Written Quote

How Much Does New Window Installation Cost in Plantation?

New window installation in Plantation, FL typically costs between $380 and $1,200 per window installed, including labor, when you’re replacing standard single-hung or double-hung openings with impact-rated or energy-efficient units. Most Plantation homeowners replacing six to ten windows on a full-home project land somewhere between $4,800 and $9,500 all-in, depending on window type, frame material, and whether the opening requires structural modification. At Sightline Windows & Doors, every one of those numbers is written on paper before a tool is lifted – Haven Clause 1, no exceptions.

New Window Installation Cost Breakdown (2026)

Plantation sits in Broward County, which means every new window installation has to meet Florida Building Code Chapter 14 for wind-borne debris resistance – a requirement that shapes product selection and pricing before you’ve chosen a frame color. The ranges below reflect what Sightline has documented across projects in Plantation’s mix of mid-century ranch homes, townhome communities near Broward Mall, and newer construction in the Jacaranda and Lauderdale Manors corridors.

What’s included in these numbers: product cost, measured survey, permit coordination with the City of Plantation Building Division, labor for removal of the existing unit, installation, buck sealing, and the documented photo record that ships with every Sightline job under Haven Clause 4 (Evidence on Every Job). What isn’t included: stucco repair if the exterior surround is cracked on removal, drywall patching beyond half-inch gaps at the interior sill, or custom interior trim upgrades. Those line items are quoted separately on the same written document – no surprise additions after the fact.

Labor in Plantation generally runs $85 to $175 per window depending on access difficulty, opening height (second-story work on the two-story homes along Cleary Boulevard adds setup time), and frame condition. On a well-maintained opening in a single-story home, installation labor sits at the lower end of that band. On a second-floor opening with stucco cracking at the flange, expect the upper range.

Before

After

What Affects New Window Installation Pricing in Plantation

Six factors consistently move the number up or down on Plantation projects. Knowing them before you call any installer puts you in a better position to evaluate competing quotes.

• Impact rating requirement: Because Plantation is in a High-Velocity Hurricane Zone (HVHZ) designation under the Florida Building Code, most exterior openings require impact-rated glazing or an approved shutter system. Impact glass – typically laminated with a PVB interlayer – costs more per unit than standard insulated glass, and there’s no way around it if you’re pulling a permit. Sightline specifies from eight manufacturer lines including PGT, CGI, CWS, and ECO Window Systems, which means the product specified is the one that fits the opening, not the one with the best margin.
• Frame material and thermal performance: Aluminum frames dominate Plantation’s older housing stock because they handle South Florida humidity without warping. Vinyl frames cost slightly less per unit and carry better U-factor numbers (lower is better for heat transfer) but can expand and contract more in Plantation’s heat cycles. The U-factor you need for FPL rebate eligibility is 0.40 or lower – Sightline will note this on the measured survey so you can claim the rebate without a second round of paperwork.
• Opening size and custom dimensions: Plantation’s ranch-style homes built between 1960 and 1985 were not built to standard rough-opening dimensions. A window that measures 36-by-48 on the wall may have an actual sightline (the visible glass area inside the frame) of 33-by-45 once the original buck is accounted for. Custom-ordered units cost more and carry longer lead times – currently four to eight weeks depending on the manufacturer line – so this is worth understanding before you commit to a project timeline.
• Number of openings and project scope: Per-unit pricing falls as the project grows. A two-window job carries the same mobilization cost as a ten-window job, so the per-unit number on a large project is meaningfully lower. On a full-home replacement of eight to twelve windows in Plantation, the effective per-unit cost typically runs 12 to 18 percent lower than on a single-window job.
• Permit fees and inspection scheduling: The City of Plantation Building Division charges permit fees that vary by project value. On a typical whole-home window replacement, permit fees run approximately $180 to $420. Sightline coordinates the permit application and inspection scheduling as part of the documented process – it’s not an add-on line item.
• Condition of the existing opening: Homes in the Plantation Acres neighborhood and along the Peters Road corridor were built with CBS (concrete block and stucco) construction. When a window comes out of a CBS wall, the flange area can reveal hairline fractures or moisture intrusion behind the original installation. Addressing that before the new unit goes in is the right call – and yes, it adds cost. Sightline’s measured survey photographs the existing condition before the quote is finalized, so there are no surprises when the old window comes out.

Impact Windows vs. Standard Windows: The Plantation Price Reality

This is the question that comes up on almost every Plantation consultation. A non-impact, energy-efficient window costs less at the unit level – sometimes significantly less. But in a city that sits 28 miles north of Miami and sits squarely within the HVHZ boundary, pulling a permit for a non-impact exterior window without a code-approved shutter system isn’t something the City of Plantation Building Division will sign off on. That’s not a sales pitch; it’s a code reality.

The practical math: a CGI or PGT impact unit in a standard double-hung configuration typically costs $140 to $280 more per window than its non-impact equivalent. Across a ten-window project, that’s $1,400 to $2,800 in additional product cost. In exchange, you get a window that meets code without a shutter system, qualifies for homeowner’s insurance discounts in Florida (ask your carrier about the Wind Mitigation Credit), and carries a documented impact rating you can hand to an underwriter. The insurance savings on a Plantation home can range from $400 to $900 per year depending on your current policy structure – potentially recovering the cost differential within three to four years.

The New Window Installation in Plantation service page goes deeper on product selection by opening type if you want to compare specifications before scheduling a survey.

Permit Requirements for New Window Installation in Plantation, FL

Every new window installation in Plantation requires a permit through the City of Plantation Building Division. This is not optional, and an installer who suggests skipping it is putting you in a position where your home sale could be complicated by an unpermitted opening – something that shows up on title searches. The permit process for a standard window replacement typically runs two to four weeks from application to final inspection, though this varies with the city’s current workload.

What you need to know before your project starts:

• The product installed must carry a current Florida Product Approval (FPA) number – Sightline keeps those on file for every unit in all eight manufacturer lines.
• The installation method must follow the manufacturer’s approved installation drawing, which becomes part of the permit package.
• A final inspection is required before the permit is closed. Sightline coordinates this directly.
• If your home was built before 1978, a lead paint disclosure is required under federal law before work begins on any painted surfaces.

How to Save on New Window Installation in Plantation

Saving on a window project in Plantation isn’t about finding the lowest bid – it’s about structuring the project and the product selection so you’re not paying for things twice. These are the approaches that actually work in this market.

Consolidate your project. If you have six windows that need replacing and four more that are aging, doing all ten at once almost always costs less per unit than two separate projects. Mobilization, permit, and inspection costs are fixed regardless of how many windows are on the job. We’ve seen Plantation homeowners save $600 to $1,200 by consolidating a planned two-phase project into one permitted scope.

Ask about the FPL rebate before you select a product. Florida Power & Light runs rebate programs for qualifying energy-efficient window replacements. Eligibility generally requires a U-factor of 0.40 or lower and a Solar Heat Gain Coefficient (SHGC) of 0.25 or lower. Those numbers are achievable in several product lines Sightline specifies. The rebate value changes annually, so confirm current amounts directly with FPL, but it’s real money that should factor into your product decision.

Get the Wind Mitigation inspection after installation. A licensed wind mitigation inspector (not Sightline – this needs to be an independent inspector for insurance purposes) can issue a Wind Mitigation Report after your new impact windows are installed and permitted. That report goes to your homeowner’s insurance carrier and can meaningfully reduce your premium. In Plantation’s insurance environment, this step is worth scheduling.

Use our Free Second Opinion on any written estimate. Bring us a competitor’s written quote and Sightline will review it at no charge – not to undercut it by a dollar, but to tell you what you’re actually comparing. We regularly see quotes in Plantation that omit permit fees, specify a product line without a current FPA number, or separate the measured survey from the installation price in ways that create a gap. The second opinion is genuinely useful.

Time your project to avoid peak demand. Hurricane season (June through November) creates demand spikes for impact window installations across Broward County. Lead times from manufacturers extend, and installer schedules compress. Projects scoped in January through April tend to have shorter lead times and more scheduling flexibility. This doesn’t mean you’ll pay a higher price in hurricane season – Sightline’s written pricing doesn’t fluctuate with demand – but you’ll wait longer for product.

To get a written price for your specific openings in Plantation, call (754) 704-3597. The measured survey is free, and the written quote you receive is the same document as the final invoice – Haven Clause 1 means they cannot differ.

What the Sightline Measured Survey Actually Looks Like

Every pricing engagement at Sightline starts the same way: a technician comes to your Plantation home, takes precise measurements of each opening, photographs the existing condition of the frame, sill, and surrounding wall, and produces a written document you keep. That document lists the specific product specified for each opening (manufacturer, series, size, impact rating, U-factor, SHGC), the labor scope, the permit coordination, and the total price. It does not change after work starts.

This matters in Plantation specifically because the housing stock is mixed: CBS homes from the 1960s and 1970s, frame construction from the 1980s and 1990s, and newer CBS-and-stucco builds in the Jacaranda Estates area all present different installation conditions. The only way to quote a Plantation window project accurately is to measure it in person. Any quote given over the phone without a site visit should be treated as a rough estimate, not a binding price.

Sightline has installed more than 18,000 windows and doors since 2012, and every one of them started with a measured survey. The photo record from that survey – and from the completed installation – stays on file under Haven Clause 4.

FAQs – New Window Installation Cost in Plantation

How much does it cost to replace all windows in a Plantation, FL home?

Replacing all windows in a typical Plantation home costs between $5,500 and $14,000, depending on the number of openings, window types, and whether the project specifies standard impact-rated aluminum units or higher-performance products with improved U-factor and SHGC ratings. A three-bedroom, two-bath ranch in the Plantation Acres area with eight to ten windows typically runs $6,200 to $10,400 using impact-rated units from product lines like PGT or CGI. The best way to get a firm number is a measured survey – call (754) 704-3597 and we’ll schedule one at no charge.

Are impact windows required in Plantation, FL?

Yes, for any permitted exterior window installation in Plantation. The city falls within Florida’s High-Velocity Hurricane Zone (HVHZ), which requires that all new and replacement exterior windows either carry an approved impact rating or be paired with a code-compliant shutter system. In practice, most Plantation homeowners choose impact-rated glazing because it eliminates the need to deploy shutters and qualifies for Wind Mitigation insurance discounts. Non-impact windows can still be specified for interior applications or enclosed Florida rooms that don’t qualify as exterior openings – but for any window open to outside air and weather, impact rating is the code requirement.

How long does new window installation take in Plantation?

The installation itself takes one to three days for a full-home replacement of six to twelve windows, depending on access and opening complexity. The longer part of the timeline is product lead time: standard impact windows from manufacturers like PGT or CWS typically run four to eight weeks from order to delivery in the current Plantation market. Custom-sized or geometric openings can extend to ten to twelve weeks. Permit processing with the City of Plantation Building Division adds two to four weeks, which runs concurrently with the manufacturing lead time in most cases.

Is it cheaper to repair or replace windows in Plantation?

Repair is cheaper in the short term – resealing a failed IGU (insulated glazing unit) or replacing a single broken lite runs $120 to $380 depending on the glass size. But if the frame itself is corroded (common in aluminum frames on homes within a few miles of the Everglades drainage canals that cut through western Plantation), or if the window doesn’t carry a current Florida Product Approval number, repair extends the life of a non-compliant unit. A window that fails wind mitigation inspection doesn’t contribute to insurance discounts regardless of how recently it was resealed. If the frame is structurally sound and the unit carries a current FPA number, repair makes sense. If not, replacement is the more defensible financial decision over a five-year horizon.

Does Sightline offer financing for window installation in Plantation?

Sightline provides a written price before any work starts, always. Payment structure options are discussed during the survey – call (754) 704-3597 to ask about current terms. What doesn’t change is the written-price commitment: the number on the survey document is the number on the final invoice.

What window brands does Sightline install in Plantation?

Sightline specifies from eight manufacturer lines: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. Product selection is based on what the opening requires – performance tier, size, glazing specification, and code compliance – not on what’s in stock or what carries the highest margin. Each manufacturer’s Florida Product Approval numbers are on file and available on request.

Key Takeaways

• New window installation in Plantation runs $380 to $1,200 per window installed, including labor and permit coordination.
• A full-home replacement of six to ten windows typically totals $4,800 to $9,500 for standard impact-rated units.
• Impact-rated glazing is required by code for exterior openings in Plantation (HVHZ designation) – budget accordingly.
• Permit fees from the City of Plantation Building Division typically add $180 to $420 to a whole-home project.
• FPL rebates and Wind Mitigation insurance discounts can offset a meaningful portion of the impact-rated premium over time.
• Sightline’s measured survey is free, and the written quote produced at survey is the final invoice – numbers don’t shift after work starts.
• All eight Sightline manufacturer lines carry current Florida Product Approval numbers, a requirement for any permitted installation in Plantation.
• The 365-Day Done Right Promise covers every installation under the Haven Standard – written into the job documentation, not offered verbally.

Get a Written Price for Your Plantation Windows

If you’re ready to know what your specific openings will cost – not a rough ballpark, but a written number per window with the product specification attached – call Sightline Windows & Doors at (754) 704-3597. A background-checked, uniformed technician comes to your Plantation home, measures every opening, photographs existing conditions, and hands you a written price before any work is discussed further. That document is the quote and the future invoice. They are the same document.

Calls are answered live, 24 hours a day. The measured survey is free. And if you have a written estimate from another installer, we’ll review it at no charge under our Free Second Opinion commitment – because a number you can verify is more useful than one you have to take on faith.

Visit the home page for a full overview of what Sightline installs and how the Haven Standard governs every project we take on.

Written by Sonia Raman, leading Sightline Windows & Doors Plantation – serving Plantation, FL since 2012. Pricing reflects the Plantation market as of 2026. Sightline Windows & Doors Plantation offers free estimates – call (754) 704-3597.

Other Services

Other Sightline Windows & Doors Plantation Services

Window Installation →Door Installation →Window Replacement →Impact Windows & Doors →Energy-Efficient Windows →Sliding & Patio Doors →Impact Garage Doors →Custom & Geometric Windows →