New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Plantation pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Windows & Doors in Sunrise, FL | Sightline Windows & Doors Plantation
We provide independent Mr-Glass service across Sunrise, FL, handling everything from seal repairs on existing units to Window Replacement - Sunrise and full-frame HVHZ-compliant replacements. The one thing that makes our Mr-Glass work here different: Sunrise sits entirely inside Broward County’s High Velocity Hurricane Zone, so every replacement window and door we install carries its own HVHZ Notice of Acceptance - not just a standard Florida Product Approval. Call (754) 704-3597 to schedule your free estimate and measured survey.
Why Sunrise Residents Choose Us for Mr-Glass Service
Sonia Raman, who leads our crew, came up through the trade after building construction coursework at Miami Dade College and has spent well over a decade measuring and installing windows across Broward County. She still points to the impact-window retrofits her team completed in Plantation’s Jacaranda neighborhood when Sunrise homeowners ask what we can handle. That background matters here because Mr-Glass sales & service in Sunrise isn’t about swapping parts - it’s about reading NOA documents, understanding how vinyl frames shim into 1970s CBS block, and knowing when a repair is legal under HVHZ rules versus when a full tear-out is required.
We are not manufacturer-authorized. Being independent means we stock OEM Mr-Glass sashes, rollers, and hardware where the profile is still supported, and we spec quality aftermarket glazing systems where it isn’t. Either way, the assembly carries a valid HVHZ NOA for your permit. Our measured survey - the one you keep - becomes your written quote. No change orders. No verbal promises that disappear when the inspector shows up.
Every technician is background-checked, uniformed, and identified by license number before arrival. The 365-Day Done Right Promise is stamped on every job, not offered as a courtesy. And calls are answered by a live person, 24/7.
Before
AfterCommon Mr-Glass Windows & Doors Problems We Solve in Sunrise
- Glazing seal failure on Mr-Glass IG units. Sunrise’s year-round UV intensity and humidity degrade vinyl extrusions and glazing seals significantly faster than manufacturers’ temperate-climate benchmarks predict. We’ve opened Mr-Glass units that hazed in four years, not the ten on the warranty card. We document the seal condition with photos and explain whether re-glazing is worth the cost or if the frame itself is too far gone.
- Roller and balance failure on single-hung and horizontal roller sashes. Lubricant dries. Nylon rollers flat-spot. Sashes drag or drop out of track. West-facing elevations in Sunrise take the worst afternoon sun, and we’ve found the thermal cycling accelerates the wear. We stock OEM Mr-Glass roller assemblies and spec upgraded stainless hardware where the original profile is discontinued.
- Vinyl extrusion warping and frame corner separation. Most Sunrise homes were built between the late 1960s and late 1980s, and the CBS rough openings are rarely square. The factory miter joint on older Mr-Glass units opens as the frame fights the masonry. We measure the opening twice - Sonia’s rule - and if the frame is moving, we recommend full-frame replacement rather than chasing gaps with caulk.
- Water intrusion at sill and jamb on impact doors. Broward’s wind-driven rain finds the gap after the original perimeter sealant ages. The impact rating is still on the label, but the door leaks every summer storm. We remove the unit, re-flash the opening, and reinstall with HVHZ-compliant sealant systems - or replace if the frame substrate is rotted.
- Jalousie-to-impact conversions in Sunrise Lakes Phase communities. Those 1970s louvered-glass windows provide near-zero hurricane protection. Replacing them means custom sizing for irregular masonry rough openings after the jalousie frames come out. Contractors unfamiliar with these buildings routinely misquote labor time before they’ve dealt with the HOA board approval layers.
Mr-Glass Service in Sunrise: What Local Conditions Mean for Your Equipment
Sunrise lies entirely within Broward County’s High Velocity Hurricane Zone - one of only two counties in the U.S. where every replacement window and door must carry a specific HVHZ Notice of Acceptance, not merely a standard Florida Product Approval. This makes Sunrise’s compliance burden categorically stricter than Palm Beach County cities just miles to the north. For Mr-Glass owners, that single rule forces a full permit, product-approval verification, and mandatory inspector sign-off on essentially every residential replacement job.
Here’s what that means in practice. A Mr-Glass horizontal roller with a standard Florida Product Approval that would pass in Boca Raton will fail a Sunrise inspection. The NOA has to name the exact product, the exact installation method, and the exact mullion configuration. We keep current NOA documents on file for every Mr-Glass model we install, and we verify them against Broward’s online database before we quote - because finding out at inspection that the paperwork is wrong costs the homeowner another four to six weeks.
The inland position helps in one way: no corrosive salt spray degrading hardware. But wind-load compliance, not corrosion, drives every material selection we make for Sunrise service area jobs. And the UV-humidity combination here chews through glazing seals faster than the warranty language implies. We tell homeowners this upfront. It’s why our written quotes include the warranty conversation as a line item.
Mr-Glass Models & Products We Service in Sunrise
We work on the full Mr-Glass residential line:
- Mr-Glass Single Hung Impact Window - vinyl frame, HVHZ-rated. Common seal and balance failures; we stock OEM replacement sashes and upgraded stainless balance systems.
- Mr-Glass Horizontal Roller / 3-Lite Sliding Impact Window - the workhorse of Sunrise’s 1980s-era patio retrofits. Roller wear and track deformation are the usual calls; we carry OEM roller kits and spec track replacement where the aluminum has worn through.
- Mr-Glass Impact Entry Door and French/Double Door series - perimeter sealant aging is the primary failure mode. We reseal with HVHZ-compliant systems or replace the frame unit if the substrate is compromised.
- Mr-Glass Hurricane Impact Fixed & Picture Window units - often paired with operating units in combination assemblies. Custom sizing for non-standard rough openings; we measure twice and the proposal states the dollar figure before any frame comes off the truck.
Our warehouse stocks OEM Mr-Glass replacement sashes, rollers, balances, and hardware for current profiles. For discontinued lines, we source quality aftermarket components that still meet HVHZ assembly requirements. We do not install non-compliant workarounds - the permit and inspection are non-negotiable in Sunrise.
Mr-Glass Service Pricing in Sunrise
Our pricing follows Haven Clause 1: the measured survey and the quote are the same document. Here’s what Sunrise homeowners can expect for common Mr-Glass services:
| Service | Price Range |
|---|---|
| Mr-Glass seal diagnosis & re-glazing (per unit) | $280 - $450 |
| Roller/balance replacement, single-hung or horizontal roller | $180 - $320 |
| Full-frame Mr-Glass single-hung replacement (per opening) | $1,100 - $1,650 |
| Full-frame Mr-Glass horizontal roller replacement (per opening) | $1,350 - $2,100 |
| Mr-Glass impact entry door replacement | $2,800 - $4,500 |
| Jalousie-to-impact conversion, Sunrise Lakes-style (per opening, custom sizing) | $1,650 - $2,800 |
| HOA documentation & ARC submission support | No additional charge |
What drives cost: the HVHZ NOA verification, permit fees, custom sizing for non-standard rough openings, and whether the original frame can be re-used. Our free estimate includes a measured survey you keep, a written scope with line-item pricing, and a photo record of the existing condition. Call (754) 704-3597 for your exact quote - estimates are free, and we review competitor written estimates at no charge.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Mr-Glass Windows & Doors in Sunrise
No. We are an independent window and door contractor who has worked on Mr-Glass products across Sunrise for years. We read their NOA paperwork, we know how their frames shim in CBS block, and we are not bound to any manufacturer’s sales script. Being independent means we can tell you when a Mr-Glass unit is worth repairing and when our Impact Windows & Doors in Sunrise represent the only HVHZ-legal answer. Call (754) 704-3597 for a free second opinion on any written estimate.
No. Sunrise is entirely inside Broward’s High Velocity Hurricane Zone, and the HVHZ requirement applies to every replacement regardless of distance from the coast. Wind load, not salt exposure, is the governing factor. A non-impact window cannot pass inspection here. The inland position does mean hardware corrosion is less aggressive than on barrier-island jobs, but the frame and glazing still must carry a valid HVHZ NOA. Call (754) 704-3597 and we’ll verify the NOA for your specific opening before we quote.
Simple roller or balance replacements: one visit, 90 minutes to two hours. Full-frame replacements: measured survey first, then permit submission to Broward County (typically 10-14 business days), then installation. Sunrise Lakes Phase and similar condo communities add four to six weeks for HOA ARC approval - we handle the documentation at no extra charge, but we cannot compress the board’s timeline. We schedule installation only after permit and HOA clearance are in hand.
We service the Mr-Glass Single Hung Impact Window, Horizontal Roller / 3-Lite Sliding Impact Window, Impact Entry Door and French/Double Door series, and Hurricane Impact Fixed & Picture Window units. For each, we verify the HVHZ NOA is current before we quote. If your unit is a discontinued profile, we’ll tell you honestly whether OEM parts are available or if a full-frame replacement with a current-NOA equivalent is the practical path.
No. The measured survey you receive at estimate becomes your written quote. If we encounter concealed damage - rotted substrate behind a door frame, for instance - we document it with photos, stop work, and present a written change order before proceeding. No surprises. That’s Haven Clause 1, and it’s been our practice since 2012. Call (754) 704-3597 to schedule your measured survey.
Service Areas Near Sunrise
We handle Mr-Glass work across central and western Broward, including Mr-Glass service in Plantation, where Sonia’s crew completed the Jacaranda neighborhood impact retrofits she still references. We also cover Mr-Glass service in Lauderhill, Davie, Lauderdale Lakes, and Tamarac. Each city has its own permit jurisdiction and HOA landscape, and we maintain current NOA files and inspection contacts for all of them.
Book Your Mr-Glass Service in Sunrise Today
Call (754) 704-3597 to schedule your free estimate and measured survey. A live person answers, 24/7. We’ll verify your Mr-Glass unit’s HVHZ compliance, inspect the existing condition with a documented photo record, and hand you a written price before any work starts. Measure it right the first time, write it down, and the installation takes care of itself.
Written by Sonia Raman, Owner at Sightline Windows & Doors Plantation, serving Sunrise since 2012.
Six Reasons Homeowners Choose Sightline Windows & Doors Plantation
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Plantation Services
