New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Plantation pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Window Replacement: The Plantation Owner’s Guide
Mr-Glass window replacement in Plantation typically runs $340-$780 per opening for standard vinyl double-hung units, with impact-rated configurations starting around $620. We stock Mr-Glass-compatible sash packs, balances, and insulated glass units on our trucks, and most replacements are surveyed and installed within one to two business days. Most Plantation homeowners discover the problem when a window won’t stay open, fogs between the panes, or the sash drops suddenly - usually after a few seasons of South Florida humidity cycling through the frame.
Which Mr-Glass Models This Applies To
Mr-Glass produces three residential window lines you’re likely to find in Plantation homes built between 2015 and 2025: the 300 Series single-hung vinyl, the 500 Series double-hung with tilt-wash sashes, and the 7000 Series impact-rated aluminum. The part you need depends on which series is in your wall.
To identify your unit, open the sash and look for the etched production code in the upper right corner of the glass. The first two digits indicate the series: 30, 50, or 70. The balance assembly in a 300 Series uses a 5/8-inch spiral tensioner with a 28-inch standard travel length, while the 500 Series upgraded to a block-and-tackle constant-force balance that Mr-Glass revised in 2019 - the post-2019 version is not backward compatible without replacing the full jamb liner. We carry both generations on the truck.
For the insulated glass unit itself, Mr-Glass sources from two OEM vendors depending on production quarter. The spacer width varies: 3/16-inch on pre-2020 units, 1/4-inch after. We measure on site rather than guess. Sightline Windows & Doors Plantation is an independent service provider, not affiliated with Mr-Glass.
We also stock parts for PGT, CGI, and CWS lines when a full-series swap makes more sense than chasing a discontinued Mr-Glass component.
Before
AfterSigns Your Mr-Glass Window Replacement Is Failing
- The sash won’t stay open or slams shut. This points to a failed balance assembly. In Plantation’s climate, the lubricant in spiral balances gums up after about 8-10 years, and the spring loses tension. We see this most often in west-facing units where afternoon heat accelerates degradation.
- Fog or condensation between the glass panes. The edge seal on the insulated glass unit has failed, allowing moist air into the airspace. Once the desiccant in the spacer saturates, the fogging becomes permanent. In Broward County’s humidity, this typically appears after 10-14 years.
- Visible drafts or temperature stratification near the window. The weatherstrip has compressed or the sash no longer seats square in the frame. Mr-Glass units use a dual-fin weatherstrip that folds flat over time; replacement requires removing the sash to access the kerf groove.
- Cracked or chipped glass with no impact point. Thermal stress fractures occur when the glass edge is constrained by a swollen vinyl frame. We’ve documented this in Plantation’s Jacaranda neighborhood on south-facing elevations where dark exterior paint raises surface temperatures above 160°F.
- The tilt latch breaks or the sash falls out of the jamb. The pivot bar wears where it rides in the balance shoe, or the shoe itself cracks. This is a safety issue - a dropped sash can damage the frame or injure someone below.
Replacement Cost & What’s Included
| Component | Typical Range (Plantation) | Notes |
|---|---|---|
| Balance assembly (per sash) | $180-$290 | Parts + labor; includes jamb liner if needed |
| Insulated glass unit (IGU) | $260-$440 | Measured to 1/16″; argon fill standard |
| Sash pack (complete sash) | $320-$510 | For frame damage or obsolete balance types |
| Full window replacement | $620-$1,180 | Impact-rated; includes permit, if required |
What drives the range: frame condition (square and plumb, or settled out of true), accessibility (ground floor vs. second story with scaffolding), and whether the existing installation used proper flashing integration. Our measured survey documents all three conditions before we name a dollar figure. The written quote you receive is the same document our installer works from - Haven Clause 1. Every replacement carries the 365-Day Done Right Promise under the Haven Standard.
DIY or Call Us?
An owner can safely check the etched code in the glass corner and photograph any visible damage for our review. What we don’t recommend: removing a sash with a failed balance, working on second-story units from a ladder, or attempting to cut a new IGU to size. The balance spring stores significant tension, and an uncontrolled release can damage the frame or cause laceration. IGU replacement requires a clean-room environment and proper edge seal pressure; field-sealed units fail within two years in Florida humidity.
We bring the measured survey, the written price, and the correct part. Call (754) 704-3597 to schedule your free estimate.
FAQs
In Broward County’s conditions, the vinyl frame and insulated glass unit typically perform for 15-22 years, though balance assemblies and weatherstrip need attention at 8-12 years. West and south elevations age faster due to thermal cycling. Call (754) 704-3597 for an exact quote on your specific unit - estimates are free.
Balance assemblies, weatherstrip, and individual IGUs can be repaired or swapped as components. If the frame is warped, the weep system is clogged with stucco, or the installation lacks proper flashing, full replacement is the sounder investment. We document both options in our written scope. Call (754) 704-3597 for an exact quote - estimates are free.
A single sash or balance swap takes 45-90 minutes on site. A full-frame replacement runs 2-4 hours per opening, plus any stucco or trim repair. We schedule one full day for up to three openings to avoid rushing the seal and flashing details. Call (754) 704-3597 for an exact quote - estimates are free.
We carry Mr-Glass-compatible balances, sash hardware, and standard IGU sizes for the 300, 500, and 7000 Series. Custom sizes or pre-2015 units require a two-day order cycle through our supplier. We verify stock against your etched code before dispatching. Call (754) 704-3597 for an exact quote - estimates are free.
Measure it right the first time, write it down, and the installation takes care of itself. That’s how Sonia Raman has run Sightline since 2012, and it’s how we handle every Mr-Glass opening in Plantation.
Written by Sonia Raman, Owner, Sightline Windows & Doors Plantation at Sightline Windows & Doors Plantation, serving Plantation and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Plantation
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Plantation Services
