New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Plantation pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Window Installation: The Plantation Owner’s Guide
Mr-Glass window installation in Plantation typically runs $340-$780 per opening depending on frame type, glazing package, and whether the opening requires impact-rated specification. We stock Mr-Glass frame components, sash hardware, and glazing beads on our Plantation service trucks, and most standard replacements can be surveyed and installed within a single scheduled visit. Homeowners usually discover a problem when they notice the sash no longer seats square in the frame, feel a draft along the meeting rail, or spot condensation between the lites that wasn’t there last season.
Which Mr-Glass Models This Applies To
Mr-Glass produces several window lines common in Plantation homes built between 2015 and 2022, and the part you need depends on which series is installed. The MG-2000 single-hung and MG-3000 horizontal roller are the two we encounter most frequently in Broward County, particularly in the Jacaranda and Plantation Acres subdivisions where spec builders used them heavily during the last construction cycle. Check the sash label, usually found on the top rail of the operable panel or the edge of the frame just behind the screen track. The label carries a nine-digit serial prefix that tells us the series, the glazing specification, and the original order date.
For hardware failures, the MG-2000 uses a proprietary cam lock and tilt-latch assembly that differs by a quarter-inch from the MG-3000 equivalent; we’ve seen homeowners order the wrong part online and discover the mismatch only after the old hardware is already removed. For glazing issues, Mr-Glass sources insulated glass units (IGUs) from multiple fabricators, so the spacer color and desiccant stripe pattern help us identify the correct replacement without disassembling the sash in your living room. We carry both OEM Mr-Glass hardware and verified aftermarket equivalents that meet the same cycle-test standards; the aftermarket route typically saves $40-$90 per opening without affecting warranty coverage on our installation work.
Sightline Windows & Doors Plantation is an independent service provider and is not affiliated with Mr-Glass.
Before
AfterSigns Your Mr-Glass Window Installation Is Failing
- Sash drifts or won’t stay open. The balance shoe or coil spring assembly has lost tension. In Plantation’s salt-air environment, we see this at 8-12 years on coastal-exposure elevations, sooner if the window faces east without overhang protection.
- Visible moisture between glass panes. The IGU seal has failed and the desiccant is saturated. Once fog appears, the unit is done; there is no field repair that restores the original U-factor or argon fill.
- Difficulty locking or unlocking. The cam lock mechanism has worn or the keeper has shifted due to frame settlement. We check for square before replacing hardware, because a new lock on a racked frame fails again in months.
- Draft at the meeting rail or frame perimeter. Compression weatherstrip has flattened or the glazing bead has pulled away. The bead profile on MG-series windows is a snap-in vinyl design that hardens and shrinks faster in south-facing installations.
- Rattling or whistling during storms. The sash-to-frame clearance has opened up, or the interlock rail gasket has compressed. This is common after repeated impact-panel cycling on hurricane-rated units.
Replacement Cost & What’s Included
Here is what we charge for Mr-Glass window installation work in Plantation, based on surveys we’ve completed in the last eighteen months:
| Service | Typical Range |
|---|---|
| Hardware replacement (lock, tilt latch, balance) | $180-$340 |
| IGU replacement (standard clear, non-impact) | $280-$460 |
| IGU replacement (impact-rated, Low-E) | $420-$680 |
| Full sash replacement (frame and glazing) | $560-$780 |
| Complete window installation (new construction or full-frame replacement) | $740-$1,400 |
The range reflects three factors: whether the opening requires ladder or scaffold access, whether the existing frame is square within 1/8 inch, and whether the original installation used standard or impact-rated specification. Our proposal states a single dollar figure after measurement, not a range, and that figure is the one on the final invoice. Haven Clause 1: Have it in writing. Every job carries the 365-Day Done Right Promise, and we leave a documented photo record showing the before condition, the installed assembly, and the operational test.
DIY or Call Us?
There is a short list of checks any owner can make safely. Verify the sash label series. Run your hand along the frame perimeter to locate the draft source. Open and close the window slowly to feel where the resistance changes. These observations help us bring the correct parts on the first trip, which saves time.
What we do not recommend: removing a sash with failed balance springs, cutting glazing tape to extract an IGU, or attempting to reset a tilt-latch without supporting the sash weight. An unsupported sash on a Mr-Glass single-hung weighs 18-34 pounds depending on size, and the drop distance to a tile floor is enough to shatter the lite and lacerate a hand. For impact-rated units, the laminated glass is heavier still and the interlayer tears in unpredictable patterns. We carry the suction cups, frame spreaders, and temporary supports that make this work predictable. Call (754) 704-3597 to schedule your free estimate, and we’ll measure the opening, identify the exact part, and give you the written price before any work starts.
FAQs
In Plantation’s subtropical climate, a properly installed Mr-Glass unit delivers 15-20 years of service for the frame and sash, with hardware typically needing attention at 8-12 years and IGUs at 10-15 years depending on elevation and exposure. Coastal homes east of University Drive see faster weatherstrip and hardware degradation from salt air. Call (754) 704-3597 for an exact quote on your specific opening - estimates are free.
No. Once the seal fails and moisture enters the airspace, the desiccant is saturated and the Low-E coating begins to oxidize at the edges. Defogging services drill holes and apply surface coatings that do not restore the original U-factor or structural integrity of the unit. We replace the IGU with a new fabricated unit sized to the existing sash. Call (754) 704-3597 for an exact quote - estimates are free.
A standard hardware or IGU replacement in an accessible opening takes 90-150 minutes from truck arrival to operational test. Full-frame replacement runs 3-5 hours per opening, longer if stucco or trim repair is required. We schedule morning or afternoon blocks and arrive within the stated window. Call (754) 704-3597 to schedule your free estimate.
We stock MG-series hardware, common glazing bead profiles, and weatherstrip sections on our Plantation-based trucks. IGUs are fabricated to measured size and delivered within 5-10 business days depending on specification. We do not guess at sizes; every unit is measured in place before ordering. Call (754) 704-3597 for an exact quote - estimates are free.
We also stock parts and perform installation for PGT, CGI, and CWS window systems.
Measure it right the first time, write it down, and the installation takes care of itself. That’s how Sonia Raman has run Sightline since 2012, and it’s the reason every one of those 18,000-plus openings left a documented photo record and a written price that matched the survey.
Written by Sonia Raman, Owner, Sightline Windows & Doors Plantation at Sightline Windows & Doors Plantation, serving Plantation and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Plantation
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Plantation Services
