New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Plantation pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Window Installation: The Plantation Owner’s Guide
CGI window installation in Plantation typically runs $340-$780 per opening depending on series, size, and whether the wall requires impact-rated anchoring. We stock CGI frame components, sash hardware, and glazing beads for same-day replacement on most Series 375, 550, and Estate Collection units. Most homeowners realize something’s wrong when a window that once sealed quietly against the frame starts rattling during afternoon thunderstorms or when the sash won’t stay open on its own.
Which CGI Models This Applies To
CGI’s product line breaks into three tiers we see regularly in Plantation homes. The Series 375 single-hung and horizontal roller are the workhorses of the 2015-2022 build era in neighborhoods like Jacaranda and Plantation Acres. The Series 550 steps up to a heavier extrusion with multi-point locking, common in custom builds west of Broward Boulevard. The Estate Collection uses a thicker frame wall and proprietary glazing bead profile that does not interchange with the 375 or 550.
Identifying your unit takes two minutes. Open the sash and look for the etched manufacturing date and series code on the glass spacer bar, visible from the interior edge. The hardware label on the sill track carries the part number for balances, locks, and rollers. We cross-reference these against CGI’s current catalog and our field records from previous Plantation installations.
OEM hardware from CGI ships on a 5-10 day lead time. We stock quality aftermarket equivalents on our trucks, manufactured to CGI’s original torque and corrosion-resistance specs, with the same 10-year finish warranty. For Estate Collection units, we use OEM glazing beads exclusively; the profile tolerance is too tight for aftermarket substitutes.
Before
AfterSigns Your CGI Window Installation Is Failing
- Sash drops or won’t stay raised. The coil balance has lost tension, usually from corrosion at the pivot shoe. In Plantation’s salt-air climate, we’ve seen balances fail in 6-8 years rather than the 15-year design life.
- Visible gap at the meeting rail when closed. The interlock weatherstrip has compressed or the sash frame has bowed from thermal cycling. This gap shows up on infrared camera readings as a 4-6 degree temperature differential.
- Rattling or whistling during wind. The glazing bead has pulled away from the frame pocket, or the sill track rollers have worn flat. Both let air bypass the primary seal.
- Condensation between glass panes. The insulated glass unit (IGU) seal has failed. CGI’s warm-edge spacer helps but does not eliminate this in south-facing windows after 10-12 years of UV exposure.
- Lock tongue won’t engage or grinds. The multi-point lock mechanism has shifted from frame settlement, or the keeper has corroded. Forcing it bends the linkage and turns a $45 part into a $220 mechanism replacement.
Replacement Cost & What’s Included
| Component | Parts + Labor | Notes |
|---|---|---|
| Coil balance replacement (single sash) | $180-$260 | Aftermarket or OEM; includes sash removal and re-glazing check |
| IGU replacement (standard 36″ × 60″) | $340-$480 | Low-E, argon-filled; tempered add $80 |
| Multi-point lock mechanism | $220-$310 | OEM required on Series 550 and Estate |
| Full sash replacement (Series 375) | $520-$680 | Includes new hardware, weatherstrip, and balance |
| Complete window installation (new construction) | $640-$780 | Impact-rated, permit and inspection included |
What drives the range: wall condition (stucco repair adds $120-$200), impact-rated anchoring requirements in HVHZ zones, and whether the original installation used CGI’s approved flashing integration or a generic substitute we need to correct. Our proposal states one number. The measured survey you keep and the written scope are the same document. Haven Clause 1.
Every replacement carries our 365-Day Done Right Promise. If the sash doesn’t seat the way it did on day one, we return and correct it. The photo record from your installation goes in your file and ours.
DIY or Call Us?
There’s a safe middle ground. You can check the etched label for series identification, photograph the hardware stamp, and confirm whether the window is still under CGI’s original product warranty (20 years on vinyl, 10 on hardware). What we do not recommend: removing a sash with a failed balance, extracting an IGU, or adjusting multi-point lock alignment. The balance is under spring tension; the IGU weighs 40-60 pounds and requires suction equipment; lock misalignment usually indicates frame settlement that needs shimming, not brute force.
We’re an independent service provider, not affiliated with CGI. We carry PGT, CWS, and ES Windows lines as well, specified by what your opening requires, not by what is in stock. Call (754) 704-3597 and we’ll review your photos against our field notes from previous Plantation installations.
FAQs
Hardware typically lasts 10-15 years; balances and weatherstrip closer to 8-12 in coastal Broward County due to salt-air corrosion and UV exposure. South-facing windows age faster. Call (754) 704-3597 for an exact quote on your series and exposure - estimates are free.
Weatherstrip and some lock keepers can be serviced; failed IGUs and worn balances require full replacement. We assess this on site and note it in writing before any work starts. Call (754) 704-3597 to schedule.
Component replacement runs 45-90 minutes per opening; full window installation requires 2-3 hours plus drying time for sealants. We schedule arrival windows and stick to them - Haven Clause 2. Call (754) 704-3597 to book.
We stock Series 375 and 550 balances, rollers, locks, and glazing beads; Estate Collection hardware orders on a 5-day cycle. We confirm parts availability when you call so we’re not making two trips. Reach us at (754) 704-3597.
Sonia Raman still points to that stretch of impact-window retrofits in Plantation’s Jacaranda neighborhood when homeowners ask what her crew can handle. Measure it right the first time, write it down, and the installation takes care of itself.
Written by Sonia Raman, Owner, Sightline Windows & Doors Plantation at Sightline Windows & Doors Plantation, serving Plantation and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Plantation
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Plantation Services
