New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Plantation pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Trusted Custom & Geometric Windows for Plantation Homeowners
Plantation Custom & Geometric Windows typically cost $1,200-$4,500 per opening depending on shape complexity, glazing specification, and whether impact-rated performance is required. Most measured surveys are scheduled within 48 hours, with installation timelines running 4-8 weeks from written quote to completion for custom-fabricated units. Call (754) 704-3597 to schedule your measured survey - the document you keep becomes your written quote under Haven Clause 1.
Since 2012, Sightline Windows & Doors Plantation has measured, specified, and installed more than 18,000 openings under the Haven Standard. In Plantation’s gated communities like Hawk’s Landing and Jacaranda, we regularly encounter builder-grade rectangular windows that homeowners want replaced with arched transoms, octagonal accents, or curved-top units that match the Mediterranean and contemporary architecture common to the area. The difference between a geometric window that fits and one that fails is the measured survey: our technicians record frame readings to 1/16 inch, note structural load paths, and document sightline measurements before any product is ordered. Every customer receives that survey to keep, and the written quote cannot deviate from it. That’s Haven Clause 1 - Have it in writing - and it has governed every one of our installations since founding.
What Our Custom & Geometric Windows Service Includes
Custom Impact Windows
Custom impact windows are fabricated to non-standard dimensions and shapes while maintaining Miami-Dade County NOA approval for hurricane resistance. In Plantation, where the Broward County wind-borne debris region requires impact-rated glazing or approved shutters, custom impact windows solve the problem of architectural character without code compromise. Sightline specifies custom impact units from PGT, CGI, and ECO Window Systems, selecting laminate interlayer thickness and frame reinforcement based on the structural reading of each opening. We have installed custom impact windows in Plantation’s older homes near Plantation Acres where standard sizes do not exist, and in newer construction where the architect specified trapezoidal or pentagonal units for stairwell landings.
Geometric & Shaped Windows
Geometric and shaped windows include triangles, hexagons, octagons, and other polygons that break from rectangular geometry. These units are specified by chord length, angle, and sightline rather than simple width-by-height, which is why templated quoting fails. In Plantation’s neighborhoods like The Hills and Plantation Gardens, we measure geometric replacements for 1980s-era homes where the original shaped windows have developed seal failure or frame rot. Sightline’s process includes a full-size template approval before fabrication - the customer signs off on the sightline drawing, and that signed document becomes part of the job record under Haven Clause 4: Evidence on every job.
Arched & Curved Windows
Arched and curved windows incorporate radius-top or fully rounded geometry, requiring jamb extensions and head flashing that accommodate the curve without water intrusion. The radius measurement determines whether the unit is a true radius, elliptical, or segmented arch, and each requires different fabrication tooling. In Plantation, we have replaced arched windows in communities like Lago Mar and Fountain Spring where the original aluminum units have thermally failed after 20-30 years. Sightline works with manufacturers including ViewLux and Mr-Glass that maintain radius bending capabilities for both impact and non-impact product lines, and we verify the radius tolerance against our field measurement before releasing the order.
Oversized Openings
Oversized openings exceed standard residential window dimensions, typically requiring steel or reinforced aluminum framing, multiple glazing lites, or structural mullion systems. In Plantation’s newer construction and renovation projects, particularly in areas like Plantation Walk and the redevelopment along Broward Boulevard, oversized openings are specified for daylighting and view corridors. Sightline engineers these openings for deflection, wind load, and thermal expansion, pulling permits through the City of Plantation Building Department when the opening modification affects the structural envelope. Our documented photo record shows the reinforcement before it is covered, satisfying both the Haven Standard and the inspection requirements that Plantation enforces.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterBrands We Service for Custom & Geometric Windows
We specify and install Custom & Geometric Windows - Fort Lauderdale and surrounding areas from eight verified manufacturer lines, selected by what the opening requires rather than what is in stock. For impact-rated custom geometry, we regularly draw from PGT and CGI, both of which maintain Miami-Dade NOA listings for non-rectangular configurations. We have installed hundreds of PGT custom impact units in Plantation and Sunrise, and we stock common CGI frame extrusions for repair scenarios. For energy-efficient custom shapes in non-impact zones or behind shutters, ECO Window Systems and ViewLux offer welded vinyl and thermally broken aluminum options with U-factors as low as 0.25 and SHGC ratings suited to Broward County’s cooling-dominated climate. Mr-Glass provides specialty laminated and decorative glazing for geometric accent windows where the primary requirement is visual character rather than structural performance.
Therma-Tru and CWS round out our specification set for integrated door-and-window systems, particularly in entryways where sidelites, transoms, and curved-top units must marry with door frames on common rough openings. ES Windows contributes oversized and structural capabilities for commercial-grade residential applications. Whether your existing windows are PGT, ViewLux, or any other make, we can measure, specify, and install the replacement. Bring us a competitor’s written estimate and we will review it at no charge - our Free Second Opinion policy applies to custom and geometric work the same as standard rectangular replacements.
Signs You Need Custom & Geometric Windows Right Now
- Visible seal failure in shaped units. Fogging between lites, mineral deposits on the interior surface, or frame distortion at the corners indicate that the insulated glass unit has lost its argon fill and is no longer performing thermally. In Plantation’s humidity, seal failure accelerates frame rot in wood-clad geometric windows and corrosion in early aluminum units.
- Water intrusion at arched or curved heads. Staining on drywall below radius-top windows, soft subflooring at the sill, or mold odor near geometric accents means the head flashing or jamb seal has failed. Curved geometry is harder to flash correctly than rectangular openings, and builder-grade installations in 1990s Plantation homes often skipped critical steps.
- Impact rating gaps in custom shapes. If your geometric or arched windows are not impact-rated and you have no approved shutter system, your homeowner’s insurance may impose penalties or exclusions under current Florida statutes. We verify NOA listings for every custom unit we specify and document the approval number on your job record.
- Structural movement visible in oversized openings. Cracks in drywall at window corners, difficulty operating sashes, or daylight visible between frame and rough opening indicate that the opening has exceeded its design deflection. Oversized units require engineering that accounts for live load, wind load, and thermal cycling - standard replacement without structural assessment risks repeated failure.
- Architectural mismatch during renovation. When you’re updating a Plantation home and the existing rectangular replacements clash with the original arched or geometric design intent, the value loss is both aesthetic and resale. We have measured and specified restoration-matched custom geometry for homes in Plantation’s historic districts and deed-restricted communities where architectural review boards enforce original character.
Our Custom & Geometric Windows Process - Step by Step
- 1
Measured survey and template creation. Our technician arrives in uniform, presents their license number, and records frame readings, rough opening dimensions, structural observations, and sightline measurements. For geometric and arched units, we create a full-size template or digital radius measurement that the customer approves before fabrication. You keep the measured survey; it becomes your written quote under Haven Clause 1.
- 2
Specification and manufacturer selection. We select the manufacturer and product line based on performance requirements - impact rating, U-factor, SHGC, visible transmittance, and design pressure - not based on margin or availability. The specification sheet includes the NOA number for impact units, the design pressure rating, and the warranty terms. You review and approve before order release.
- 3
Permit application and approval. For oversized openings, structural modifications, or any work requiring inspection, we pull permits through the City of Plantation Building Department. Our permit package includes the engineered shop drawings, the product approval documentation, and the scope of work derived from your signed measured survey.
- 4
Fabrication and delivery verification. Custom and geometric windows typically fabricate in 4-6 weeks. Upon delivery, we verify the unit against the approved template and specification sheet before scheduling installation. Any discrepancy is documented and resolved before the unit leaves our warehouse - Haven Clause 5, No surprises, applies at every handoff.
- 5
Installation, inspection, and documentation. Our crew installs per the manufacturer’s published instructions and the engineered drawings, with photo documentation at rough opening, flashing, and finish stages. For permitted work, we schedule and pass inspection. You receive the documented photo record, the completed warranty registration, and the 365-Day Done Right Promise stamped on your job file. If it’s not done right, we make it right - written into the Haven Standard, not a verbal assurance.
How Much Does Custom & Geometric Windows Cost in Plantation?
A typical custom impact window in Plantation runs $1,800-$3,800 per opening for standard geometric shapes - triangles, trapezoids, and radius-tops in sizes up to 40 united inches. Arched and curved units with true radius fabrication range $2,400-$4,500 depending on radius complexity and whether the frame is thermally broken aluminum or reinforced vinyl. Oversized openings requiring structural mullions or steel reinforcement start at $3,500 and scale with engineering requirements. Non-impact custom geometry for interior or shutter-protected applications runs $1,200-$2,800 per opening.
| Window Type | Typical Range in Plantation | Primary Cost Drivers |
|---|---|---|
| Custom impact geometric (triangle, trapezoid) | $1,800 - $3,800 | Laminate thickness, frame reinforcement, NOA listing |
| Arched or radius-top unit | $2,400 - $4,500 | Radius accuracy, jamb extension, head flashing complexity |
| Oversized opening with structural mullion | $3,500 - $6,500+ | Engineering, steel reinforcement, permit/inspection scope |
| Non-impact custom accent window | $1,200 - $2,800 | Glazing type, frame material, decorative options |
Several factors move these ranges. Impact-rated laminate interlayers add 30-50% over non-impact glazing. Radius work requiring true bending rather than segmented approximation adds fabrication cost but eliminates the flat spots that catch light incorrectly. Oversized units that require crane rental for delivery - common in Plantation’s two-story homes with limited access - add $800-$1,500 to the project. Permit and inspection fees for structural work run $300-$600 through the City of Plantation.
To avoid overpaying, obtain a measured survey that specifies exact dimensions rather than accepting a “typical size” allowance that adjusts later. Sightline’s written quote is derived from the survey you keep; there are no change orders for field conditions we should have measured. Our free estimate includes the specification sheet, the permit scope if applicable, and the installation timeline. Call (754) 704-3597 to schedule - estimates are free, and we offer a Free Second Opinion on any competitor’s written quote.
Custom & Geometric Windows Near Plantation - Our Service Area
We install custom and geometric windows across central and western Broward County, with typical measured survey scheduling within 48 hours in Plantation, Sunrise, Lauderhill, Davie, Lauderdale Lakes, and Tamarac. For Cooper City, Fort Lauderdale, Oakland Park, Pembroke Pines, Hollywood, and Weston, survey scheduling typically runs 2-4 days depending on current project load. We have completed custom geometric installations in Sunrise’s Sawgrass Estates, Lauderhill’s Inverrary communities, and throughout Davie’s equestrian properties where oversized openings and arched architecture are common. Whether your project is a single arched replacement in Plantation Gardens or a full-home geometric specification in Weston Hills, the process is identical: measured survey, written quote, documented installation. Return to our home page for full service details.
Serving Plantation, FL - Our Local Coverage Area
We’re based in the Plantation area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Custom & Geometric Windows in Plantation
Custom & Geometric Windows in Margate and nearby areas follow the same installation process of measuring, fabricating, and installing windows in non-rectangular shapes - including arches, circles, triangles, and polygons - or in non-standard dimensions that require manufacturer customization rather than stock selection. At Sightline, every custom or geometric project begins with a measured survey that records frame readings, radius measurements, and sightline dimensions to 1/16 inch; that survey becomes the written quote and the fabrication template under Haven Clause 1.
Custom and geometric windows typically require 4-8 weeks from measured survey to completed installation, with 4-6 weeks of that being fabrication time at the manufacturer. Permitted structural work or oversized openings may add 1-2 weeks for City of Plantation plan review. We do not promise same-day or next-week installation for custom-fabricated units - the timeline is determined by the manufacturer’s current production queue and the complexity of the geometry. Call (754) 704-3597 for current lead times on your specific specification.
Pompano Beach Custom & Geometric Windows, like those in Plantation, range from $1,200 for non-impact accent shapes to $6,500+ for oversized structural openings with impact-rated glazing. Most residential geometric replacements fall in the $1,800-$4,500 range per opening. The price varies by shape complexity, glazing specification, and whether the unit must carry a Miami-Dade NOA for impact resistance. Call (754) 704-3597 for an exact quote based on your measured survey - estimates are free.
Yes, we specify and install custom and geometric units from both ECO Window Systems and ViewLux, selecting between them based on the performance requirements of each opening. ECO Window Systems offers welded vinyl custom geometry with strong thermal performance for non-impact or shutter-protected applications. ViewLux provides aluminum custom shapes with narrow sightlines for contemporary architecture where frame width matters. Both manufacturers deliver full-size template approval before fabrication, which we require for every geometric job.
We answer calls live 24 hours a day, and we can dispatch a technician for board-up and weatherproofing of damaged custom or geometric windows to secure the opening until custom fabrication is complete. We do not stock custom-shaped replacement units - by definition, they are fabricated to order - so permanent replacement follows the standard 4-6 week fabrication timeline. For impact-rated custom units with seal failure or frame damage that does not compromise the building envelope, we schedule measured survey within 48 hours and expedite the fabrication order when the manufacturer permits.
Every custom and geometric installation is covered by the manufacturer’s product warranty - typically 10-20 years on the insulated glass unit and frame, varying by brand - plus Sightline’s 365-Day Done Right Promise written into the Haven Standard. If the installation is not done right, we make it right within one year, including adjustments to operation, seal performance, or finish integrity. The warranty documentation is registered in your name and included in your job file with the documented photo record.
Clear access to the interior and exterior of each window opening, remove window treatments that obstruct the frame, and have available any original architectural drawings or previous replacement documentation. Our technician needs to measure the rough opening, assess structural conditions, and photograph the existing installation for the job record. You do not need to be present for the entire appointment, but we require your signature on the measured survey and template approval before fabrication release. Call (754) 704-3597 to schedule - estimates are free.
Schedule Your Custom & Geometric Windows Service in Plantation Today
Call (754) 704-3597 to schedule your free measured survey. A live person answers 24 hours a day. You’ll receive the written survey to keep, a line-item quote that cannot deviate from it, and a documented photo record when the job is done. Every installation carries the 365-Day Done Right Promise under the Haven Standard. No obligation, no change orders, no surprises.
Written by Sonia Raman, Owner at Sightline Windows & Doors Plantation, serving Plantation, Sunrise, Lauderhill, and central Broward County since 2012.
Six Reasons Homeowners Choose Sightline Windows & Doors Plantation
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Plantation Services
