New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Plantation pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Sliding & Patio Doors: The Plantation Owner’s Guide
We stock and install CGI-compatible sliding and patio door systems in Plantation, with typical installed pricing from $1,850 to $4,200 depending on series and opening size. Most CGI roller, track, and handle assemblies are on our trucks, and we can usually inspect and quote same-day if you call (754) 704-3597. Most Plantation homeowners discover a problem when the door sticks in the track during humid mornings, or when the lock no longer seats flush after a tropical storm passes through.
Which CGI Models This Applies To
CGI’s sliding and patio door lineup breaks into three series we see regularly in Plantation: the Estate Series (ES) with its 2-1/4 inch frame depth, the Sentinel Series with the reinforced interlock, and the commercial-grade Targa Series. The roller housing width, track profile, and interlock geometry differ between them, and ordering the wrong assembly means a second trip.
To identify your series, check the spacer bar label inside the glass unit edge, or the roller housing stamp visible when the panel is lifted slightly from the track. The Estate Series uses a 1-1/2 inch diameter nylon roller with a stainless axle; Sentinel steps up to a dual-wheel assembly with a brass bushing; Targa runs a heavy-duty tandem roller rated for panels over 400 pounds. We carry both OEM CGI assemblies and quality equivalents from C.R. Laurence that match the original spec at a lower unit cost, and we’ll show you both options on the written quote. Sightline Windows & Doors Plantation is an independent service provider, not affiliated with CGI.
Before
AfterSigns Your CGI Sliding & Patio Door Is Failing
- The panel sticks or skips when you push it. This usually means the roller axle has corroded or the wheel bearing has seized. In Plantation’s salt-air environment, we see this on homes west of University Drive more often than inland, where the coastal humidity accelerates oxidation inside the housing.
- The door drops on one side and scrapes the sill. The roller adjustment screw has backed out, or the roller bracket itself has cracked from repeated impact against the track stop. If the panel has dropped more than 3/16 inch, the track cap is probably damaged too.
- Lock tongue won’t extend fully into the keeper. The multipoint lock mechanism has worn internally, or the door has settled enough that the lock rail no longer aligns with the frame-mounted keeper. This is a security issue, not just an annoyance.
- Visible rust weeping from the track ends or roller housing. Once moisture enters the housing, the axle pitts and the wheel wobbles. We replace the full assembly at this stage; cleaning and re-greasing buys weeks, not years.
- Draft or water intrusion at the sill after rain. The weatherstrip has compressed past recovery, or the sill track drain holes are clogged with debris. In Plantation’s afternoon storm pattern, standing water in the track finds any gap.
Replacement Cost & What’s Included
| Component | Parts + Labor Range | Notes |
|---|---|---|
| Roller assembly (single) | $180 - $340 | OEM CGI or C.R. Laurence equivalent |
| Roller assembly (dual/tandem) | $290 - $520 | Sentinel and Targa series |
| Track cap replacement | $240 - $410 | Includes sill prep and alignment |
| Multipoint lock system | $380 - $650 | Handle, cylinder, and lock rail |
| Full panel rehang and tune | $560 - $890 | When frame is true; adjustment only |
| Complete CGI sliding door (new) | $1,850 - $4,200 | Installed, measured, permit-ready |
What drives the range: the series (Estate vs. Sentinel vs. Targa), whether the frame has shifted in the opening, and whether we find secondary damage to the track or weatherstrip during disassembly. Every quote is written before work starts, and the measured survey you keep matches the final invoice. The 365-Day Done Right Promise covers the installation; OEM parts carry CGI’s warranty, and our C.R. Laurence equivalents carry a 5-year replacement guarantee.
DIY or Call Us?
There is one safe check a homeowner can make: vacuum the track and flush the sill drain holes with a thin wire. Beyond that, CGI sliding panels weigh 150 to 350 pounds depending on size and glass package, and the roller adjustment screws sit under spring tension. We have seen cracked frames from pry-bar attempts and lacerations from dropped panels. The hardware is specific to the series, and the interlock geometry tolerates about 1/16 inch of misalignment before the weatherstrip fails.
We carry the common assemblies on our trucks, and our technicians are background-checked, uniformed, and identified by license number before arrival under Haven Clause 3. If you want to know exactly what failed and what it costs to fix, call (754) 704-3597 and we’ll schedule a measured survey. The written price comes before any tool is lifted.
FAQs
In South Florida’s climate, expect 8 to 14 years from a quality roller assembly, with coastal exposure shaving 2 to 3 years off that range. The salt air west of University Drive and the repeated expansion-contraction from afternoon storms are the main wear factors. Call (754) 704-3597 for an exact quote on replacement - estimates are free.
Once the axle shows corrosion or the wheel wobbles, replacement is the only reliable fix. Cleaning and lubrication restores smooth operation for a few weeks, but the underlying damage progresses. We stock both OEM and equivalent assemblies and will show you both on the written quote.
Most single-roller replacements take 90 minutes to 2 hours; a full track cap and roller job runs 3 to 4 hours. We arrive with the measured survey already done, so the clock starts when the truck stops. The photo record of the completed work goes to you by end of day.
We carry the common Estate and Sentinel roller assemblies, track caps, and multipoint lock components. Targa commercial hardware is ordered same-day from our Miami distributor with next-morning delivery. If we don’t have it, we’ll tell you exactly when it arrives, not “soon.”
Call (754) 704-3597 to schedule your free estimate. We’ll measure the opening, identify your CGI series, and hand you a written price before any work starts. That’s Haven Clause 1, and it’s how we’ve handled every one of the 18,000+ openings since 2012.
Written by Sonia Raman, Owner, Sightline Windows & Doors Plantation at Sightline Windows & Doors Plantation, serving Plantation and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Plantation
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Plantation Services
