New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Plantation pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Sliding & Patio Doors in Hollywood, FL
A typical impact sliding glass door replacement in Hollywood runs $2,800-$5,500 installed, with impact French patio doors ranging $3,200-$6,800 depending on opening size and frame material. Every installation requires a permit from Hollywood’s Building Department, and because the city sits entirely within Florida’s High-Velocity Hurricane Zone, every unit must carry a Miami-Dade Notice of Acceptance or Florida Product Approval matched to the opening’s design pressure. Call (754) 704-3597 to schedule your free measured survey and written quote.
Fast, Reliable Sliding & Patio Doors Across Hollywood

We serve Hollywood from our Miami office, with crews running daily routes through Hollywood Hills, the barrier island corridor, and the acreage properties west of I-95. That local routing means we’re not guessing at your drive time or sending a tech who’s never seen a CBS ranch rough opening from 1962. We’ve measured, quoted, and installed sliding and patio doors in Hollywood since the brand’s founding in 2012, and our Sliding & Patio Doors in Hollywood team knows the specific failure modes this market produces: salt-pitted aluminum frames east of US-1, jalousie-era rough openings that don’t match modern impact unit dimensions, and county permitting paths for properties on open land outside city limits.
Our calls are answered by a live person, 24/7. Not a callback window. When you reach us, we book a measured survey you keep, and the written quote we produce from that survey is the same document that governs the installation. No change orders. No “we found an issue once we started.” Haven Clause 1: Have it in writing.
Before
AfterWhy Sightline Windows & Doors Plantation Is Hollywood’s Preferred Sliding & Patio Doors Company
We’ve completed more than 18,000 window and door installations since 2012, every one with a written price before work started and a documented photo record when finished. In Hollywood specifically, that work includes hundreds of sliding glass door replacements on post-war CBS ranches where the original aluminum sliders have reached end of life. Our customers in Hollywood Hills and along the Intracoastal corridor leave reviews that mention the same things: the measured survey they could compare to the final invoice, the license number on the technician’s uniform, the photo record emailed before the crew left.
Response time to Hollywood is same-day or next-day for measured surveys, depending on route density. Installations are scheduled once your impact-rated units arrive from fabrication, typically 4-6 weeks for custom HVHZ-compliant orders. For standard sizes from our PGT and CGI inventory, that window can compress. We do not promise same-day installation on planned construction work; we promise a written scope, a verified crew, and an installation date that holds.
Our technicians are background-checked and uniformed under Haven Clause 3. The person at your door is the person on the record, with a license number you can verify. This matters in Hollywood, where the Building Department’s inspectors know the difference between a proper pressure-rated buck and a shimmed shortcut, and where a failed inspection costs weeks, not days.
Our Sliding & Patio Doors Services in Hollywood

Patio Doors
Standard patio door installation in Hollywood starts with a measured survey of the rough opening, the wall thickness, and the structural condition of the surrounding frame. On Hollywood’s 1950s-1970s CBS ranches, we often find non-standard rough openings that require custom fabrication or frame-out work before the new unit can be set. We specify by performance tier and price range from our eight manufacturer lines, not by what we have in stock. A typical vinyl-framed patio door in Hollywood runs $2,200-$4,000; aluminum-clad or thermally broken frames move higher.

Impact Sliding Glass Doors
Impact sliding glass doors are the standard replacement in Hollywood, not an upgrade. Because the entire city falls within the HVHZ, every replacement must carry a Miami-Dade NOA or Florida Product Approval, and the design pressure must match the opening’s exposure and height. We specify PGT and CGI impact sliders with laminated glass interlayers and low-E coatings for the solar heat gain coefficient this climate demands. Installed prices in Hollywood range $2,800-$5,500 for standard openings, with large or multi-panel configurations running $4,500-$7,500. Our Sliding & Patio Doors team pulls the permit, coordinates inspection, and documents the installation with photos you receive on completion.

Sliding Glass Door Replacement
Replacement work in Hollywood is rarely straightforward. The original aluminum sliders in neighborhoods like Hollywood Hills were sized to rough openings that don’t align with modern impact-rated dimensions, and the salt-laden air east of US-1 often destroys the frame before the glass fails. We replaced a failed 1970s aluminum slider on a CBS ranch in Hollywood Hills where the salt air east of US-1 had pitted the frame so badly the rollers were riding on oxidized metal and the glass itself was still intact - a classic frame-failure-before-glass-failure scenario. Our tech pulled the old jalousie-era rough opening, built a properly sized pressure-rated buck instead of shimming, and set a PGT impact sliding glass door with laminated glass interlayer and low-E glass so the opening met HVHZ design pressure and passed inspection on the first walk. The homeowner bundled an impact French patio door at the rear elevation for wind mitigation and kept the same Broward County permit open across both openings.

Impact French Patio Doors
Impact French patio doors serve as both aesthetic upgrades and wind-mitigation improvements on Hollywood homes where the rear elevation opens to a patio, pool deck, or acreage yard. We specify Therma-Tru and ViewLux impact-rated French door systems with multi-point locking hardware and HVHZ-compliant glazing. Installed prices range $3,200-$6,800 depending on width, sidelite configuration, and frame material. On properties with acreage around Hollywood, we scope access for material delivery, crane placement if needed, and drainage conditions that affect sill performance over time.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hollywood
We draw from eight verified manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - specified by what the opening requires, not by what is in stock. For Hollywood’s HVHZ environment, we most often specify PGT and CGI impact sliding systems for their Miami-Dade NOA coverage and tested design pressures, with Therma-Tru and ViewLux for impact French patio door applications where architectural detail matters. We maintain relationships with regional distributors that stock common HVHZ configurations for faster turnaround on standard sizes, while custom units move through fabrication on a 4-6 week timeline. Every product is selected by performance tier and price range, and the specification is written into your quote before any order is placed.
Common Sliding & Patio Doors Problems We See in Hollywood Homes

- Salt-air frame failure east of US-1. Properties between the Atlantic and the Intracoastal Waterway experience chronic salt-laden air that pits and oxidizes aluminum slider frames within years. The glass remains intact while the frame deteriorates, causing the unit to rack, drag on the track, and ultimately fail. Re-glazing is not an option; the full unit must be replaced with a properly pressure-rated buck.
- Shimmed shortcuts in old jalousie rough openings. Hollywood’s Building Department inspectors specifically flag jobs where a contractor has shimmed a modern impact slider into an oversized jalousie or single-pane aluminum rough opening without a pressure-rated buck sized to HVHZ design pressure. This fails inspection and forces a costly tear-out and re-do. We build proper bucks on every job.
- Stormwater ponding on acreage properties. On open-lot and acreage properties around Hollywood, flat topography and undersized track drainage let stormwater collect against the door sill. Water wicks under the threshold and rots the buck long before the glazing is due. We scope grading and drainage conditions during our measured survey and specify sill pan and drainage improvements where needed.
- Non-compliant original units in 1950s-1970s CBS ranches. Hollywood’s enormous stock of post-war concrete block ranch homes was built with jalousie and single-pane aluminum windows and doors that are categorically non-compliant with current HVHZ code. Full-opening impact replacements are a near-universal need, not an optional upgrade, and the permitting path is mandatory with no like-for-like exemption.
What Sliding & Patio Doors Costs in Hollywood
Impact sliding glass doors in Hollywood typically run $2,800-$5,500 per opening installed, with impact French patio doors at $3,200-$6,800. Large or custom openings - multi-panel sliders, oversized French door systems, or configurations requiring structural header modification - move into the $4,500-$7,500 range. Whole-home packages with multiple door and window openings start around $8,000 and can exceed $25,000 depending on opening count and product tier.
Several factors specific to Hollywood move the price:
- Opening count and configuration. Each additional sliding or patio door adds linear footage of frame, glass, and hardware, but there are economies in bundling multiple openings under a single permit and inspection cycle.
- Wind zone and design pressure. Hollywood’s HVHZ status means every unit must be specified to a design pressure appropriate for its exposure, height, and surrounding topography. Higher design pressures require heavier framing and hardware.
- Floor height and access. Barrier island condos and mid-rise buildings require coordinated delivery and sometimes crane access. Acreage properties may require long material hauls from the road.
- Frame material and thermal performance. Standard vinyl frames cost less than thermally broken aluminum or aluminum-clad wood. Low-E coatings and argon fill add to the unit cost but reduce cooling load in Hollywood’s climate.
- Frame-out and buck work. Where original jalousie or single-pane rough openings are oversized or deteriorated, we build pressure-rated bucks rather than shim. This adds labor and material but passes inspection the first time.
Every engagement begins with a free measured survey you keep. The written quote produced from that survey is the same document that governs the installation. Call (754) 704-3597 to schedule yours.
Pricing for Sliding & Patio Doors in Hollywood, FL

We name prices in dollars because Haven Clause 1 demands it. A typical Hollywood homeowner replacing a single failing aluminum slider with an impact-rated PGT or CGI unit should expect $2,800-$5,500 all-in, including permit, inspection, and documented photo record. Impact French patio doors run $3,200-$6,800. Properties on acreage around Hollywood may see additional scope for access, drainage improvements, or county permitting paths.
What affects your specific number: the rough opening condition, the design pressure required for your exposure, the frame material you select, and whether the original unit was set in a jalousie-era opening that needs a proper buck. We do not quote over the phone from a description. We measure, document, and write the price before any work starts. Bring us a competitor’s written estimate and we’ll review it at no charge under our Free Second Opinion policy.
Florida Pays You Back
Several programs reduce the net cost of impact sliding and patio door upgrades in Hollywood:
- My Safe Florida Home. Matching grants up to $10,000 for qualifying wind-mitigation upgrades, including impact-rated door replacements on primary residences. The program sets eligibility and award amounts; we document the work to support your application.
- Florida sales-tax exemption. Impact-resistant windows and doors are exempt from state sales tax. The exemption applies to the product cost; we itemize this on your written quote.
- Federal 25C energy credit. 30% of product cost, up to $600 per year, on qualifying energy-efficient units. The credit applies to the product, not installation, and requires manufacturer certification.
- Windstorm premium credits. Average around 25% on the windstorm portion of your homeowner’s premium after a qualifying wind-mitigation inspection, which runs $75-$150. Final credits are set by your carrier; we do not guarantee amounts.
We Also Serve Cities Near Hollywood

Our crews run daily routes through Fort Lauderdale, Miami Gardens, Plantation, and Pembroke Pines, with the same measured-survey process and written-price guarantee that governs our Hollywood work. If your property sits near a city boundary or your project spans multiple jurisdictions, we coordinate permitting and inspection across all applicable Building Departments. Call (754) 704-3597 to discuss your specific location.
Serving Hollywood, FL - Our Local Coverage Area
We’re based in the Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Hollywood

Yes, absolutely. Hollywood’s Building Department requires a permit for every window and door replacement without exception, and there is no like-for-like exemption. The permit application must include the Miami-Dade NOA or Florida Product Approval number for the specific impact-rated unit being installed, and the design pressure must match the opening’s requirements under HVHZ. We pull the permit as standard scope on every job, coordinate inspection scheduling, and include the permit cost in your written quote. Call (754) 704-3597 for a free measured survey and quote that includes full permit handling.
Salt-laden air east of US-1 oxidizes and pits aluminum slider frames years before the glass fails, so the unit racks, drags on the track, and can’t be re-glazed - it has to come out as a full unit. This is the most common failure mode we see in Hollywood Hills and barrier island properties. The glass is intact but the frame is structurally compromised, and the rollers are riding on oxidized metal rather than a sound track. Replacement with a properly pressure-rated impact unit is the only permanent fix. Call (754) 704-3597 and we’ll document the frame condition during your free measured survey.
Yes, but it almost always requires custom fabrication or frame-out work, not a standard off-the-shelf unit. Hollywood’s post-war CBS ranch homes were built with non-standard rough openings sized to jalousie and single-pane aluminum units that don’t align with modern impact-rated dimensions. We measure the existing opening, specify a custom or semi-custom unit from PGT, CGI, or another verified line, and build a pressure-rated buck rather than shimming into the oversized opening. This passes HVHZ inspection the first time. Call (754) 704-3597 to schedule the measured survey that determines your exact specification.
A properly specified impact sliding or patio door with low-E glass and appropriate SHGC for south Florida’s climate can reduce solar heat gain significantly, but the exact savings depend on your home’s orientation, existing envelope performance, and HVAC system. We specify U-factor and SHGC values appropriate for Hollywood’s exposure during our product selection, and the documented performance ratings are included in your written quote. For a precise energy-impact assessment, we can coordinate with a qualified energy auditor. Call (754) 704-3597 to discuss performance specifications for your specific openings.
Yes. Properties on acreage around Hollywood present specific scoping considerations: county rather than city permitting, septic and well setbacks that affect equipment access, long material hauls from the road, and flat-lot grading that can pond stormwater against door sills. We scope all of these conditions during our measured survey, specify drainage improvements where needed, and coordinate the permitting path appropriate to your property’s jurisdiction. The written quote includes any access or drainage scope required. Call (754) 704-3597 to schedule a survey for your acreage property.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Hollywood since 2012 under the Haven Standard.
Six Reasons Homeowners Choose Sightline Windows & Doors Plantation

Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Plantation Services
What Neighbors Say About Sightline Windows & Doors Plantation
